Beschreibung

The UM (United Molders) MK5i Auto Cap is a screw on cartridge which activates on contact with water. This will replace the cap fitted to most SeaSafe Lifejackets. United Moulders Cartridge will fit all automatic lifejackets that use the UML Mk5 and UML Mk5i type inflator.

The UM Pro Sensor Auto Cap is also a screw on cartridge which activates on contact with water. Pro Sensor Cartridges will fit all automatic lifejackets that use the UML Mk5 and UML Mk5i type inflator and also the Pro Sensor head.

• The above cartridge mechanism’s has a compressed high powered spring which is held by a paper element. When the paper element dissolves it releases the spring which allows the firing mechanism to puncture the CO2 cylinder, the CO2 then travels through the manifold and inflates the lifejacket.

The UM Pro Sensor Elite Auto Cap is also a screw on cartridge which activates on contact with water. The inflator provides additional improvement on the standard MK5 Automatic Inflator, affording the user one point of status indication to confirm that the unit has been automatically or manually activated.

The Halkey Roberts Bobbin also known as the ‘super bobbin’ fits all Halkey Roberts mechanisms.

The Bobbin is designed to disintegrate when exposed to water, this allows the firing mechanism to puncture the CO2 cylinder and fill the inflatable chamber. Install Bobbin with the white pill facing the cap of the inflator. The Bobbin Assembly will slide in easily if installed correctly. Bobbin must be stored in a cool dry environment (65 ºF to 85 ºF , 19 ºC to 29 ºC). To ensure consistent service from your manual/automatic inflator the bobbin should be changed at regular intervals or replace bobbin more frequently in certain conditions or if the life jacket has not been stored correctly.

The Secumar Auto Pill is a soluble spare pills for all SECUMAR lifejackets with these firing mechanisms SECUMATIC 3001S, SECUMATIC 2000 or SECUMATIC 10. Each SECUMAR pill is individually weighed and tested for tolerances. So, for example, the weight tolerance is only 0.03 g (three hundreds of a gram). Any deviation in the consistency of the material would otherwise mean several seconds delay in activation of the lifejacket or in some circumstances non-activation of the lifejacket.

Suction Cap with Cord  – for use with Mk5i & Pro-Sensor (NOT Elite) UM auto capsule only. Using the suction cap with cord, you can quickly convert the operating mechanism from an Automatic to a Manual when needed for boarding Helicopters, or in enclosed areas,  etc…. The cap must to be removed once you are free from the enclosed area.